SKU: PM500X1BD-EJD
BRAND: Rockford
Powerful marine amplifier with 500W output, perfect for enhancing your John Deere Gator's audio system.
Read More
The PM500X1bd is a 500 Watt mono amplifier with high dynamic power using Class-bd technology and a conformal coated pc board designed for motorsport and marine applications.
With its super efficient Class-bd circuit topology, the PM500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
Punch Marine 500 Watt Class-BD Mono Amplifier Features:
- High level input capable with Auto Turn-On circuit
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- RCA pass-thru outputs
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminum heatsink
- Short circuit protection
- Over current protection
- Infrasonic filter
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specifications
- Number of Channels - 1
- Total Power (Sum of Rated Power) - 500 Watts
- Rated Power (RMS Continuous Power) - 150 Watts x 1 @ 4-Ohm, 300 Watts x 1 @ 2-Ohm, 500 Watts x 1 @ 1-Ohm
- Dynamic Power (PVC/PowerCube®) - 224 Watts x 1 @ 4-Ohm, 410 Watts x 1 @ 2-Ohm, 787 Watts x 1 @ 1-Ohm
- Bridgeable - No
- Frequency Response - 20Hz to 250Hz +/- 1.0dB
- Input Sensitivity - 150 mV - 12 V
- Circuit Topology Class - Class BD
- Efficiency (average) - 86% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise) - 4-Ohm: <1.0%, 2-Ohm: <1.0%, 1-Ohm: <1.0%
- Signal Input - Hi/Low level: 1 RCA pair
- Signal Output - Low level: 1 RCA pair
- Tone Controls - Punch EQ2 Bass: 0dB to +18dB @ 45Hz
- Crossover Controls - Low-Pass (LP): 50-250Hz @ 12dB/octave Butterworth, Infrasonic Filter (IF): 28Hz @ 12dB/Octave, All-Pass (AP): No
- Remote Controls - Optional Punch Level Control (PLC2) Ready
- Visual Indicators - Power/Protect/Thermal LED, Input Clip LED3, Output Clip LED1,2,3 (LED Color Legend: 1BLUE: <0.5% THD, 2VIOLET: 1% THD, 3RED: 10%+ THD)
- Power Wire Gauge - 4 AWG
- Power Input Connector - Captive C-Clamp
- Speaker Wire Gauge - 8 AWG to 18 AWG
- Speaker Output Connector - Captive C-Clamp
- Cooling - Convection
- Heatsink
- Operating Voltage - 9 - 16 VDC
- Recommended Fuse (not included) - 80 A
- Average Current Draw (13.8V Music) - 35 A
- Max. Current Draw (13.8V Sinewave) - 70 A
- Suggested Alternator - 75 A
